Note: You are reading this message either because you can not see our css files, or because you do not have a standards-compliant browser.

LOGO: Journal of Cotton Science


Battery Condenser System Total Particulate Emission Factors and Rates for Cotton Gins: Method 17

Authors: J. Clif Boykin, Michael D. Buser, Derek P. Whitelock, and Gregory A. Holt
Pages: 101-110
Engineering and Ginning
DOI: (

This report is part of a project to characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was focused on Environmental Protection Agency (EPA) total particulate emission factors. EPA AP-42 emission factors generally are assigned a rating, from A (excellent) to E (poor), to assess the quality of the data being referenced. Current EPA total particulate emission factor ratings for cotton gins are extremely low. Cotton gin data received these low ratings because the data were collected almost exclusively from a single geographical region. The objective of this study was to collect additional total particulate emission factor data for battery condenser systems from cotton gins located in regions across the cotton belt using EPA-approved stack sampling methodology. The project plan included sampling seven cotton gins. Key factors for selecting specific cotton gins included: 1) facility location, 2) production capacity, 3) processing systems, and 4) abatement technologies. Six gins with battery condenser system exhausts equipped with cyclones were sampled. The average production rate during testing for the six gins was 30.8 bales/h. The average battery condenser system total particulate emission factor based on six tests (18 total test runs) was 0.032 kg/227-kg bale (0.070 lb/500-lb bale). This average total particulate emission factor was higher than that currently published in 1996 EPA AP-42, which was 0.018 kg/bale (0.039 lb/bale). The battery condenser system emission rate test averages ranged from 0.17 to 1.40 kg/h (0.37-3.09 lb/h).